Adafruit HUZZAH32 – ESP32 Feather Board KiCad Footprint
 |
| Adafruit HUZZAH32 – ESP32 Feather Board KiCad Footprint |
Adafruit HUZZAH32 – ESP32 Feather Board KiCad Footprint
This is basic of Adafruit HUZZAH32 – ESP32 Feather Board KiCad Footprint. You can add courtyard and other element to this footprint later.
The dimensions of Adafruit HUZZAH32 – ESP32 Feather Board : 51.0mm x 22.7mm x 7.3mm / 2.0" x 0.9" x 0.3".
This footprint is based on the Adafruit Huzzah32 Eagle board.
Adafruit HUZZAH32 Specifications
specifications from Espressif about the ESP32:
- 240 MHz dual core Tensilica LX6 microcontroller with 600 DMIPS
- Integrated 520 KB SRAM
- Integrated 802.11b/g/n HT40 Wi-Fi transceiver, baseband, stack and LWIP
- Integrated dual mode Bluetooth (classic and BLE)
- 4 MByte flash include in the WROOM32 module
- On-board PCB antenna
- Ultra-low noise analog amplifier
- Hall sensor
- 10x capacitive touch interface
- 32 kHz crystal oscillator
- 3 x UARTs (only two are configured by default in the Feather Arduino IDE support, one UART is used for bootloading/debug)
- 3 x SPI (only one is configured by default in the Feather Arduino IDE support)
- 2 x I2C (only one is configured by default in the Feather Arduino IDE support)
- 12 x ADC input channels
- 2 x I2S Audio
- 2 x DAC
- PWM/timer input/output available on every GPIO pin
- OpenOCD debug interface with 32 kB TRAX buffer
- SDIO master/slave 50 MHz
- SD-card interface support
Download Adafruit HUZZAH32 – ESP32 Feather Board KiCad Footprint
Download Adafruit HUZZAH32 – ESP32 Feather Board KiCad Footprint via the link below:
