KiCAD Projects: Simple Synthesizer by Imsaiguy
A single-board analog synthesizer, includes:
- Three oscillators square and triangle
- Noise source
- Three channel mixer
- Voltage controlled filter based on 303
- Voltage controlled amplifier
- Envelope generator with attack decay
- Amp to drive speaker
Three jumper wires are required for the revision C board:
- Jump CA3046 pin 14 to pin 11
- Pin 13 to pin 10
- Pin 12 to pin 9
- Bend out pins 12 13 14 so they are not electrically connected to board this is done because pin 13 of the CA3046 needs to float.
Follow the link below to get circuit diagrams and schematics of Simple Synthesizer in KiCAD format:
KiCAD Projects: Simple Synthesizer
