RP2040 Zero KiCad Custom Symbol
 |
| RP2040 Zero KiCad Custom Symbol |
This time I tried to make and share the RP2040 Zero by Waveshare symbol and footprint.
RP2040 Zero Specifications:
- RP2040 microcontroller chip designed by Raspberry Pi in the United Kingdom
- Dual-core Arm Cortex M0+ processor, flexible clock running up to 133 MHz
- 264KB of SRAM, and 2MB of on-board Flash memory
- USB-C connector, keeps it up to date, easier to use
- Castellated module allows soldering direct to carrier boards
- USB 1.1 with device and host support
- Low-power sleep and dormant modes
- Drag-and-drop programming using mass storage over USB
- 29 × multi-function GPIO pins (20× via edge pinout, others via solder points)
- 2 × SPI, 2 × I2C, 2 × UART, 4 × 12-bit ADC, 16 × controllable PWM channels
- Accurate clock and timer on-chip
- Temperature sensor
- Accelerated floating-point libraries on-chip
- 8 × Programmable I/O (PIO) state machines for custom peripheral support
RP2040 Zero KiCad Custom Symbol
For the symbol I made based on the RP2040 pinout image above. Pinouts depicted are only GP0-GP15, GP26-GP29 and Power Pins.
If you are interested, it can be downloaded for free via the link below:
